Frequency-domain analytic method for efficient thermal simulation under curved trajectories laser heating

Egileak: Daniel Mejía Aitor Moreno Guerrero Jorge Posada Velásquez Oscar Ruiz Iñigo Barandiaran Martirena Juan Carlos Poza Raúl Chopitea

Data: 01.12.2019

Mathematics and Computers in Simulation


Abstract

In the context of Computer Simulation, the problem of heat transfer analysis of thin plate laser heating is relevant for downstream simulations of machining processes. Alternatives to address the problem include (i) numerical methods, which require unaffordable time and storage computing resources even for very small domains, (ii) analytical methods, which are less expensive but are limited to simple geometries, straight trajectories and do not account for material non-linearities or convective cooling. This manuscript presents a parallel efficient analytic method to determine, in a thin plate under convective cooling, the transient temperature field resulting from application of a laser spot following a curved trajectory. Convergence of both FEA (Finite Element Analysis) and the analytic approaches for a small planar plate is presented, estimating a maximum relative error for the analytic approach below 3.5% at the laser spot. Measured computing times evidence superior efficiency of the analytic approach w.r.t. FEA. A study case, with the analytic solution, for a large spatial and time domain ( and history, respectively) is presented. This case is not tractable with FEA, where domains larger than and require high amounts of computing time and storage.

BIB_text

@Article {
title = {Frequency-domain analytic method for efficient thermal simulation under curved trajectories laser heating},
journal = {Mathematics and Computers in Simulation},
pages = {177-192},
volume = {166},
keywds = {
Heat transfer; Laser heating; Analytic solution; Efficient simulation; Parallel computing; Thin plate
}
abstract = {

In the context of Computer Simulation, the problem of heat transfer analysis of thin plate laser heating is relevant for downstream simulations of machining processes. Alternatives to address the problem include (i) numerical methods, which require unaffordable time and storage computing resources even for very small domains, (ii) analytical methods, which are less expensive but are limited to simple geometries, straight trajectories and do not account for material non-linearities or convective cooling. This manuscript presents a parallel efficient analytic method to determine, in a thin plate under convective cooling, the transient temperature field resulting from application of a laser spot following a curved trajectory. Convergence of both FEA (Finite Element Analysis) and the analytic approaches for a small planar plate is presented, estimating a maximum relative error for the analytic approach below 3.5% at the laser spot. Measured computing times evidence superior efficiency of the analytic approach w.r.t. FEA. A study case, with the analytic solution, for a large spatial and time domain ( and history, respectively) is presented. This case is not tractable with FEA, where domains larger than and require high amounts of computing time and storage.


}
doi = {10.1016/j.matcom.2019.05.006},
date = {2019-12-01},
}
Vicomtech

Gipuzkoako Zientzia eta Teknologia Parkea,
Mikeletegi Pasealekua 57,
20009 Donostia / San Sebastián (Espainia)

+(34) 943 309 230

Zorrotzaurreko Erribera 2, Deusto,
48014 Bilbo (Espainia)

close overlay

Jokaeraren araberako publizitateko cookieak beharrezkoak dira eduki hau kargatzeko

Onartu jokaeraren araberako publizitateko cookieak